Structural Metals

4" x 2" x 14GA x 20 ft Base Angle | Mild Steel Base Angle | Structural & Fabrication Grade

The 4" x 2" x 14‑gauge Base Angle is a versatile mild‑steel structural angle commonly used in metal building construction, framing, trim support, bracing, and general fabrication. With 4‑inch and 2‑inch legs, 14GA thickness, and a 20‑ft length, this base...

4" x 2" x 14GA x 25 ft Base Angle | Mild Steel Structural Angle | Metal Building & Fabrication Grade

The 4" x 2" x 14‑gauge Base Angle is a lightweight structural steel angle commonly used in metal building construction, framing, trim support, bracing, and general fabrication. With 4‑inch and 2‑inch legs, 14GA thickness, and an extended 25‑ft length,...

4‑1/2 In. Bar Tie — Concrete Reinforcement Accessory

A 4‑1/2 inch bar tie is a compact, pre‑formed steel wire tie used to secure intersecting pieces of rebar or wire mesh in concrete construction. It is commonly used in foundations, slabs, walls, and structural reinforcement grids where tight spacing and...

4in × 2in × 14GA × 20ft C‑Purlin (Primed)

Structural Steel Section for Roofing, Framing & Metal Building Systems This 4‑inch × 2‑inch × 14‑gauge primed C‑purlin is a versatile structural member designed for roofing, wall girts, framing, fencing, and general metal‑building...

5‑1/2 In. Bar Tie — Concrete Reinforcement Accessory

A 5‑1/2-inch bar tie is a short, pre‑formed tie used to secure intersecting pieces of rebar or wire mesh in concrete construction. It is commonly used in foundations, slabs, walls, and general reinforcement work to keep steel in proper alignment during...

6 Ft x 1‑5/8 In x 16 Ga Horse Stall Channel

Description This stall channel is made from 16‑gauge steel, giving it the strength needed to support stall boards while remaining easy to install. The 1‑5/8 in. interior width fits standard 2x lumber, and the 6‑ft length is ideal for typical stall wall...

6 In x 14 GA x 25 Ft Receiver Channel

A 6" × 14‑gauge × 25‑ft receiver channel is a structural steel component used in metal‑building framing, purlin support, carports, and general construction. It is designed to “receive” C‑purlins or girts at building ends,...

6 in x 14 GA x 30 ft Receiver Channel

A 6" × 14‑gauge × 30‑ft receiver channel is a medium‑to‑heavy‑duty structural steel component used in metal‑building framing, end‑wall reinforcement, and purlin support. Its 6‑inch web height and 30‑foot span make it suitable for commercial,...

6 in x 2 in x 14 GA x 25 ft C Purlin (Primed)

A primed 6" × 2" × 14‑gauge C‑purlin is a heavy‑duty structural steel member used in metal building frames, roofing systems, wall girts, and general structural applications. It combines strength, long‑span capability, and corrosion‑resistant...

6 In × 2 In × 11GA × 24 FT Rectangular Tubing

Description This rectangular tubing features a 6-inch by 2-inch profile with 11‑gauge wall thickness, offering excellent rigidity and strength for structural builds. The 24‑ft length provides ample material for long spans, trailer rails, equipment...

6 in × 2 in × 14 GA × 20 ft C‑Purlin (Primed)

This 14‑gauge primed C‑purlin provides a strong, lightweight structural solution for roof and wall framing. The 6‑inch web and 2‑inch flange profile offer reliable load‑carrying capacity for commercial, agricultural, and residential steel structures. The...

6 in × 2 in × 14 GA × 30 ft C‑Purlin (Primed)

This 6‑inch × 2‑inch × 14‑gauge primed C‑purlin is a strong, versatile structural member designed for metal buildings, roofing systems, wall girts, and medium‑to‑large framing applications. The 30‑ft length provides excellent span capability,...