Product Description
Weldcote Metals E71T-1 .045 In. x 33 lb Flux-Cored Carbon Baked Steel WireWeldcote Metals E71T-1 features lower spatter and fume emissions than conventional products in this class
- E71T-1 is intended for single and multiple-pass welding of carbon and certain low alloy steels in all positions, particularly in the overhead and vertical up positions.
- Weldcote Metals E71T-1 is used where a minimum tensile strength of 70,000 psi is required in the deposited weld metal.
- Weldcote metals E71T-1 electrodes are classified with CO? shielding gas by this specification however, gas mixtures of argon-CO? are also used to improve usability, especially for out-of-position applications.
- Decreasing amount of CO2 in the argon-CO2 mixture will increase the manganese and silicon in the deposit and may improve the impact properties. The larger diameters (5/64" and larger) are used for welding in the flat position and for horizontal fillets. The smaller diameters (usually 1/16" and smaller) are used for welding in all positions.
- E71T-1 is characterized by a spray transfer, low spatter loss, flat to slightly convex bead configuration with a moderate volume of slag which completely covers the weld bead. E71T-1 electrodes have a rutile base slag.
AWS A 5.36 / ASME SFA 5.346
Size: E71T-1 .045 Inch x 33# Spool
LEKE71T1045X33SP-N-YAG
