Weldcote Metals E6022 1/8 In. Mild Steel Welding Rods 10lbs

Weldcote Metals E6022 has a smooth, easy to control arc with excellent strike and re-strike characteristics.

6022 has low spatter and a light slag. 6022 is designed for deep penetration welding where burn-through spot welding such as roof decking to support beams and similar applications are required.
6022 electrodes are typically used in single pass, high speed and welding of groove welds in the flat welding position, lap joints in the horizontal welding position and fillet welds on sheet metal. The weld bead may be more convex and less uniform while welding at higher speeds.
Used on moderate to poor or hard to clean steels such as painted, greasy and galvanized or plated steels as well as square edge butt joints. Welding position shall be flat or horizontal. Applications also include sheet metal, light gauge materials and poor or hard to clean steels.
Use short arc or drag technique holding electrode angle to 10-15 degrees from 90 degrees. Please note that procedures may vary with a change in position, base metals, filler metals, equipment and other changes.

Weldcote Metals